Когда я в свое время искал, как это сделать на samsung nc10, нашел на вики арщлинукса такую веселую шнягу)setpci -s 00:02.1 F4.B=ХХгде ХХ = 00 FFЭто ни в коем случае не рекомендация к действию, но пинок в нужную сторону-)
man setpci гласит: .DEVICE SELECTION Before each sequence of operations you need to select which devices you wish that operation to affect. -s [[[[lt;domaingt;]:]lt;busgt;]:][lt;slotgt;][.[lt;funcgt;]] Consider only devices in the specified domain (in case your machine has several host bridges, they can either share a common bus number space or each of them can address a PCI domain of its own; domains are numbered from 0 to ffff), bus (0 to ff), slot (0 to 1f) and function (0 to 7). Each component of the device address can be omitted or set to *, both meaning any value. All numbers are hexadecimal. E.g., 0: means all devices on bus 0, 0 means all functions of device 0 on any bus, 0.3 selects third function of device 0 on all buses and .4 matches only the fourth function of each device.Осталось подставить параметры.Ну, или вот так: -d [lt;vendorgt;]:[lt;devicegt;] Select devices with specified vendor and device ID. Both ID39;s are given in hexadecimal and may be omitted or given as *, both meaning any value А даташит на дисплей через ssh не поискать?
